Diy Pool Heater Solar

Simple Diy Pool Heater Solar

Diy pool heater solar – Building a DIY solar pool heater to take advantage of free energy from the sun. Solar energy can raise the temperature of your pool several degrees and extend your swimming season by at least three months. The technique is simple and the parts are easily accessible.

The best location for the Diy pool heater solar is a south-facing sloping platform in full sun. This makes a pitched roof an ideal location. Most backyard pools are close to a house or garage, and proximity to the pool equipment is important to minimize heat loss, as the hot water travels from the sun warms back to the pool. If your pool is not close to a building with a suitable roof, consider building an angled platform with a plywood surface and construction timber.

Weight is also a consideration. Water weighs 8.34 pounds per gallon, and a solar heating unit filled with water can add up to several hundred pounds of weight on the roof or platform. Make sure the location you select will carry the extra weight. The surface area of an effective Diy pool heater solar must be equal to 75% of the surface area of your pool. For example, if your pool is 15 feet by 30 feet, pool area 450 square feet. The surface of the solar heater must be about 340 square feet.